Why is a Stiltz Home Lift perfect for every home?
Whether you are starting to find the stairs difficult or you are planning ahead and ‘future proofing’ your home, with the range of Stiltz Home Lifts you can now get upstairs and down with ease and without compromising on style and décor.
The discreet and elegant Stiltz Home Lift travels smoothly and quietly between floors on self-supporting slim rails so it is there when you need it, but at all other times it is unobtrusive. With no hydraulics or supporting walls required, the lift plugs straight into a normal domestic power socket and it simple and easy to use as you glide between floors – all at the touch of a button.
Moving around the home with the compact Stiltz Duo range of home lifts has never been so easy. Get up and down in less than 30 seconds in style, safety and comfort. The Duo Home Lift will blend into any décor and is simple to use.
- Small footprint of 0.55m2
- Carries up to 2 people
- Stylish clear, curved car body
- Smooth and quiet
The Stiltz Trio+ is a larger home lift designed to take a full-sized wheelchair. Alternatively, it can carry up to 3 people. The home lift has a clear car body allowing it to always remain discreet.
- Small footprint of 1.25m2
- Carries up to 3 people/full sized wheelchair
- Full or half door options
- Single Entry or ThruCar option
The home lift that supports you every step of the way
Installing a home lift in your home is a big decision. However, at Stiltz, we have worked hard to make sure everything in our home elevators, right down to the smallest detail, makes them safe, attractive and simple to use.
Don’t compromise on floor space
When you are not on the same floor as your home lift, our clever design means that you can use the floor space where the residential elevator would usually be. There is no dead space with our lifts whatsoever.
Built-in sensors automatically detect obstructions above or below when the Stiltz home lift is moving between floors. Your home elevator will immediately, but smoothly, stop until the obstruction is removed.
Simple control panel
The operation of your home lift is simple and intuitive with easy to use hold-to-run controls. Everything is in just the right place. For additional safety and security, the control panel can be secured with a key.
With a compact footprint no larger than 104cm x 76cm (0.55m2), Stiltz Home Lifts provide flexible placement options leaving more space for your home furnishings. The home elevator is one of the smallest lifts available in the Middle East.
Unlike most other residential elevators there is no need for load-bearing walls with a Stiltz Home Lift. A Stiltz Home Lift runs on its own vertical rails which are fixed to ceiling and floor, reducing noise and vibration.
Plug and play
Well, almost. Your Stiltz home lift plugs straight in to a standard domestic electricity socket and uses no more electricity than it takes to boil a kettle. This means our residential elevators are one of the most energy efficient on the market.
Integrated drive system
The advanced wire rope hoist system which is engineered in all Stiltz home lifts is super-safe, durable and quiet. It is concealed inside the top of the lift so there is no need for hydraulics or external machinery.
Ergonomic and stylish design
Minimalist, contemporary and with the highest specification, the design of our home elevators subtly catches the eye and fit seamlessly into any style of home décor. The placement options are almost limitless.
All home lifts by Stiltz include two remote controls as standard so you can call the lift from any floor, at any time at your convenience. There is an option to purchase additional units if these are needed.
Stylish flexibility. You are in control of your home lift
The beauty of a Stiltz home lift is that you can install it almost anywhere in your home. In the corner of a sitting room, in the kitchen, in a cupboard, in the turn of a stairwell or through a galleried landing. Because a Stiltz does not need load-bearing walls but is the only freestanding home elevator available, you can even put it in pride of place in the centre of the room!
This is our most popular installation - the home lift will travel between a downstairs room such as a living room with the elevator arriving upstairs, typically in a master bedroom.
Where there is enough room in the turn of a staircase, this positioning option makes use of the dead space in the void making the Stiltz home lift even more unobtrusive.
Cupboard to Cupboard
Thanks to the compact nature of the Stiltz home lift, you can choose to have your lift completely hidden by installing it inside an airing cupboard or wardrobe for ultimate discreetness.
Our vertical rails need to fix to a horizontal surface. But do not worry if you have a vaulted ceiling. Stiltz building teams can provide subtle solutions to overcoming pitched roof installations.
If you are looking to get from your outside garage safely into your home we can build a simple shaft around your Stiltz internal lift to take into all account health and safety considerations.
Unique to Stiltz residential elevators is the ThruCar concept - available for the Trio+. Enter and exit through opposite sides of the lift car - ideal for wheelchair users or for lifts built into a stairwell void.
Request a Call Back
Fields marked with * are required